Unveiled: the ultimate guide to connecting brother mfc-j4335dw to wifi

Connecting your Brother MFC-J4335DW printer to your WiFi network is a crucial step to unleash its wireless printing capabilities. This comprehensive guide provides step-by-step instructions to help you establish a seamless connection between your printer and your network, ensuring effortless printing from your devices.

Prerequisites

Before proceeding, ensure you have the following:

• Brother MFC-J4335DW printer
• Wireless network with password
• Computer or mobile device with WiFi access

Connecting via WPS

Method 1: Using the WPS Button

1. Press and hold the “WPS” button on your printer until the “WiFi” light starts flashing.
2. Within 2 minutes, press the “WPS” button on your router.
3. The “WiFi” light on your printer will stop flashing once the connection is established.

Method 2: Using the Printer’s WPS PIN

1. On the printer’s LCD screen, navigate to “Menu” > “Network” > “Wireless LAN” > “WPS PIN.”
2. Enter the WPS PIN on your router’s WPS setup page.
3. The “WiFi” light on your printer will stop flashing once the connection is established.

Connecting via USB Cable

1. Connect one end of the USB cable to your printer and the other end to your computer.
2. Turn on the printer and wait for it to be recognized by your computer.
3. Once recognized, open the “Control Panel” on your computer and select “Printers and Faxes.”
4. Right-click on the “Brother MFC-J4335DW” printer and select “Properties.”
5. Click on the “Ports” tab and select “Add Port.”
6. In the “Add Port” window, select “Standard TCP/IP Port” and click “New Port.”
7. Enter the IP address of your printer (found on the printer’s LCD screen under “Network” > “Wireless LAN” > “IP Address“) and click “OK.”
8. Click “Close” to save the settings.

Connecting via WiFi Direct

1. On the printer’s LCD screen, navigate to “Menu” > “Network” > “Wireless LAN” > “WiFi Direct.”
2. Enable WiFi Direct and set a password.
3. On your computer or mobile device, connect to the WiFi Direct network using the password you set.
4. Open the printing software on your device and select the “Brother MFC-J4335DW” printer.

Verifying Connection

Once you have connected your printer to WiFi, verify the connection by printing a test page.

1. On the printer’s LCD screen, navigate to “Menu” > “Reports” > “Network Configuration.”
2. Print the “Network Configuration” report.
3. Ensure that the “Status” section of the report shows “Connected” and that the “IP Address” is assigned.

Troubleshooting

If you encounter any issues connecting your printer to WiFi, try the following:

• Ensure your printer and router are within range.
• Check if your router’s firewall is blocking the printer’s connection.
• Restart your printer and router.
• Reset your printer’s network settings to factory defaults.

Final Thoughts

Connecting your Brother MFC-J4335DW printer to WiFi is a straightforward process that allows you to print wirelessly from multiple devices. By following the steps outlined in this guide, you can establish a stable and reliable connection, ensuring seamless printing experiences.

Questions We Hear a Lot

1. Why is my printer not connecting to WiFi?

• Check if your printer and router are within range and that there are no physical obstructions.
• Ensure your router’s firewall is not blocking the printer’s connection.
• Restart your printer and router.

2. How do I reset my printer’s network settings?

• On the printer’s LCD screen, navigate to “Menu” > “Network” > “Wireless LAN” > “Reset Network Settings.”
• Enter the password and press “OK.”

3. Can I connect my printer to multiple WiFi networks?

• Yes, you can switch between different WiFi networks using the “WiFi Direct” feature. However, only one connection can be active at a time.