Overview
- Carefully insert a plastic pry tool or a thin object into the gap between the keyboard and the laptop chassis.
- If the new keyboard is not functioning properly, check the connection of the keyboard cable and ensure that it is securely seated.
- If you damage the keyboard cable, you will need to purchase a replacement cable and follow the steps in this guide to replace it.
A malfunctioning keyboard can be a major hindrance to your productivity. If you’re facing this issue with your HP ProBook 440 G5, replacing the keyboard is a relatively straightforward task that you can easily accomplish yourself. This blog post will provide you with a detailed step-by-step guide on how to replace the HP ProBook 440 G5 keyboard.
Tools and Materials Required
Before you begin, gather the following tools and materials:
- New HP ProBook 440 G5 keyboard
- Phillips #0 screwdriver
- Plastic pry tool (optional)
Step-by-Step Guide
1. Power Down and Disconnect
Power down your laptop and disconnect all external devices, including the power cord.
2. Remove the Battery
Slide the battery release latch to the unlocked position and remove the battery.
3. Remove the Screws
Locate the six screws securing the keyboard to the laptop chassis. They are usually located along the top and bottom edges of the keyboard. Use the Phillips #0 screwdriver to remove these screws.
4. Pry Open the Keyboard
Carefully insert a plastic pry tool or a thin object into the gap between the keyboard and the laptop chassis. Gently pry upward along the edges to release the keyboard from the clips holding it in place.
5. Disconnect the Keyboard Cable
Once the keyboard is loose, carefully lift it and disconnect the keyboard cable from the motherboard. Note the orientation of the cable and the connector.
6. Remove the Old Keyboard
Completely remove the old keyboard from the laptop.
7. Align and Install the New Keyboard
Place the new keyboard over the keyboard bay and align it with the clips. Gently press down on the keyboard until it snaps into place.
8. Connect the Keyboard Cable
Reconnect the keyboard cable to the motherboard, ensuring that it is properly seated.
9. Secure the Keyboard
Replace the six screws you removed earlier to secure the keyboard to the laptop chassis.
10. Reinstall the Battery
Insert the battery back into its compartment and slide the release latch to the locked position.
11. Power On and Test
Power on your laptop and test the new keyboard to make sure it is functioning correctly.
Tips for Troubleshooting
- If you encounter any difficulties removing the keyboard, try using a plastic pry tool to gently pry it open.
- Be careful not to damage the keyboard cable or the connector on the motherboard.
- If the new keyboard is not functioning properly, check the connection of the keyboard cable and ensure that it is securely seated.
Wrapping Up
Replacing the HP ProBook 440 G5 keyboard is a relatively simple task that can be completed in under an hour. By following the steps outlined in this guide, you can restore your laptop to full functionality and continue your work without interruption.
Information You Need to Know
1. How often should I replace my HP ProBook 440 G5 keyboard?
The lifespan of a keyboard varies depending on usage and care. However, it is generally recommended to replace the keyboard every 3-5 years.
2. Can I use a third-party keyboard replacement?
Yes, you can use a third-party keyboard replacement as long as it is compatible with the HP ProBook 440 G5.
3. What if I damage the keyboard cable during replacement?
If you damage the keyboard cable, you will need to purchase a replacement cable and follow the steps in this guide to replace it.