Cut to the Chase - The Blog with Honest Laptop Assessments

Wi-fi dropout? troubleshoot and reset your canon mg3620 printer now!

Essential Information

  • If your printer is unable to connect to your Wi-Fi network, resetting the Wi-Fi settings can refresh the connection and resolve any issues.
  • The Wi-Fi light on the printer will continue to flash while the printer resets its Wi-Fi settings.
  • The Wi-Fi password for your printer is usually printed on the bottom of the printer or on the Wi-Fi setup sheet that came with the printer.

Are you facing issues connecting your Canon printer MG3620 to your Wi-Fi network? Resetting the printer’s Wi-Fi settings can often resolve these problems. In this detailed guide, we’ll walk you through the step-by-step process of resetting your Canon printer MG3620 Wi-Fi.

Why Reset Your Printer’s Wi-Fi?

  • Connection problems: If your printer is unable to connect to your Wi-Fi network, resetting the Wi-Fi settings can refresh the connection and resolve any issues.
  • Network changes: If you’ve recently changed your Wi-Fi network name or password, you’ll need to reset the printer’s Wi-Fi settings to connect to the new network.
  • Troubleshooting: Resetting the Wi-Fi settings can help troubleshoot various printing issues that may be related to network connectivity.

Step-by-Step Instructions for Resetting Canon Printer MG3620 Wi-Fi

1. Power Off the Printer

Start by powering off your Canon printer MG3620. Unplug the power cord from the back of the printer.

2. Locate the Wi-Fi Button

On the front panel of the printer, locate the “Wi-Fi” button. It’s usually a small blue button with a Wi-Fi symbol.

3. Press and Hold the Wi-Fi Button

Press and hold the “Wi-Fi” button for approximately 5 seconds. The power light on the printer will start flashing.

4. Release the Wi-Fi Button

Once the power light starts flashing, release the “Wi-Fi” button. The printer will now enter the Wi-Fi reset mode.

5. Wait for the Wi-Fi Light to Flash

The Wi-Fi light on the printer will continue to flash while the printer resets its Wi-Fi settings. Wait until the light stops flashing and remains solid.

6. Power On the Printer

Once the Wi-Fi light remains solid, plug the power cord back into the printer. Power on the printer.

7. Reconnect to Wi-Fi

After the printer powers on, it will be in Wi-Fi setup mode. Follow the on-screen instructions to reconnect the printer to your Wi-Fi network.

Troubleshooting Tips

  • If the Wi-Fi light does not flash after pressing and holding the “Wi-Fi” button, try resetting the printer to its factory settings.
  • If you cannot reconnect the printer to your Wi-Fi network after resetting, check if your network settings are correct.
  • If you continue to experience issues, contact Canon support for further assistance.

Takeaways: A Restored Connection

By following these steps, you can successfully reset the Wi-Fi settings on your Canon printer MG3620. This will restore the printer’s connection to your Wi-Fi network, allowing you to print wirelessly without any hassle.

Information You Need to Know

Q: How do I reset my Canon printer MG3620 to its factory settings?
A: To reset your printer to its factory settings, press and hold the “Stop” button for 5 seconds.

Q: Why does my Canon printer MG3620 say “Wi-Fi not connected”?
A: This error message usually indicates that your printer is not connected to your Wi-Fi network. Check if your Wi-Fi network is active and your printer is within range.

Q: How do I find the Wi-Fi password for my Canon printer MG3620?
A: The Wi-Fi password for your printer is usually printed on the bottom of the printer or on the Wi-Fi setup sheet that came with the printer.

Was this page helpful?No
K
About the Author