Acer nitro 5 take-apart tutorial: repair, upgrade, and maintain like a pro

Essential Information

Remove the screw securing the wireless card and lift it out of the slot.
Disconnect the remaining cables and wires from the motherboard, including the power cable, fan cable, and any other connected devices.
Remove the screws securing the motherboard to the chassis.

Are you ready to delve into the inner workings of your Acer Nitro 5? Whether you’re upgrading components, performing maintenance, or simply curious about its construction, this comprehensive guide will provide you with the step-by-step instructions you need to disassemble your device safely and efficiently.

Safety Precautions

Before you begin, it’s crucial to take the following safety precautions:

Power off your Acer Nitro 5 and disconnect all cables.
Discharge any residual electricity by holding the power button for 15 seconds.
Use a clean, well-lit workspace.
Have a magnetic screw tray or small container to keep track of screws.

Tools Required

To disassemble your Acer Nitro 5, you’ll need the following tools:

Phillips #00 screwdriver
Spudger or plastic pry tool
Anti-static wrist strap (optional but recommended)

Step-by-Step Disassembly Guide

1. Remove the Bottom Cover

Flip your Nitro 5 upside down and locate the 11 screws securing the bottom cover.
Use the #00 screwdriver to remove all 11 screws.
Gently pry up the bottom cover using the spudger or pry tool, starting from the rear edge.

2. Disconnect the Battery

Locate the battery connector on the left-hand side of the motherboard.
Use the spudger to carefully disconnect the battery connector.

3. Remove the RAM

Locate the two RAM slots on the motherboard.
Press down on the clips on both sides of each RAM module.
Lift the RAM modules straight up and out of their slots.

4. Remove the Storage Drive

Locate the storage drive (SSD or HDD) on the motherboard.
Disconnect the SATA cable and power cable from the storage drive.
Remove the screw securing the storage drive and lift it out.

5. Remove the Wireless Card

Locate the wireless card slot on the motherboard.
Use the spudger to gently pry up the wireless card antenna wires.
Remove the screw securing the wireless card and lift it out of the slot.

6. Remove the Motherboard

Disconnect the remaining cables and wires from the motherboard, including the power cable, fan cable, and any other connected devices.
Remove the screws securing the motherboard to the chassis.
Carefully lift the motherboard straight up and out of the chassis.

7. Remove the Cooling System

Disconnect the fan cable from the motherboard.
Remove the screws securing the fan to the heatsink.
Lift the fan and heatsink assembly out of the chassis.

8. Remove the Display Panel

Open the display panel to a 90-degree angle.
Remove the screws securing the display panel to the chassis.
Carefully lift the display panel straight up and out of the chassis.

Reassembly Tips

Once you’ve completed your repairs or upgrades, reassemble your Acer Nitro 5 in the reverse order of disassembly. Here are some tips:

Tighten all screws securely, but avoid overtightening.
Reconnect all cables and wires properly.
Ensure that all components are seated correctly before powering on the device.

Wrapping Up

Disassembling your Acer Nitro 5 can be a daunting task, but by following these step-by-step instructions, you can do it safely and effectively. Whether you’re upgrading components, performing maintenance, or simply exploring the inner workings of your device, this guide will empower you to tackle the task with confidence.