Wake up your xerox workcentre 6515 in seconds! the secret method revealed

The Xerox WorkCentre 6515 is a versatile multifunction printer that offers efficient printing, copying, scanning, and faxing capabilities. However, if your WorkCentre 6515 falls into sleep mode, it can become unresponsive and disrupt your workflow. This blog post will provide a comprehensive guide on how to wake up your Xerox WorkCentre 6515, ensuring that you can resume your printing tasks seamlessly.

Waking Up the Xerox WorkCentre 6515

1. Power Cycle the Printer

The first step in waking up your WorkCentre 6515 is to perform a power cycle. Follow these steps:

• Turn off the printer using the power switch located at the back.
• Unplug the power cord from the power outlet.
• Wait for a few minutes to allow the printer to discharge any residual power.
• Plug the power cord back into the power outlet.
• Turn on the printer using the power switch.

2. Check the Control Panel

If the power cycle does not wake up the printer, check the control panel. Look for any error messages or indicators that may suggest a specific issue. If any error messages are displayed, refer to the user manual for troubleshooting instructions.

3. Use the Web Interface

You can also use the web interface to wake up your WorkCentre 6515. To do this:

• Open a web browser on a computer connected to the same network as the printer.
• Enter the printer’s IP address in the address bar.
• Log in to the web interface using the default username and password (admin/1111).
• Navigate to the “Settings” tab.
• Select the “Power Management” option.
• Check the box next to “Wake on LAN (WoL)”.
• Click “Save Changes”.

4. Send a Wake-Up Command

Another way to wake up your WorkCentre 6515 is to send a wake-up command using the Command Line Interface (CLI). To do this:

• Open a Command Prompt or Terminal window on a computer connected to the same network as the printer.
• Enter the following command:

“`
wakeonlan MAC_ADDRESS
“`

• Replace “MAC_ADDRESS” with the MAC address of your WorkCentre 6515.

5. Use a Wake-Up Button

Some Xerox WorkCentre 6515 models may have a dedicated wake-up button. If your printer has this button, simply press it to wake up the device.

6. Check the Power Saving Settings

If your WorkCentre 6515 goes to sleep frequently, check the power saving settings. To do this:

• Open the Xerox CentreWare Internet Services (CWIS).
• Navigate to the “Properties” tab.
• Select the “Power Save” option.
• Adjust the power saving settings to your desired preferences.

7. Contact Xerox Support

If you have tried all the above methods but your WorkCentre 6515 still does not wake up, contact Xerox support for further assistance.

Troubleshooting Common Issues

Printer Not Responding to Wake-Up Commands

• Ensure that the printer is connected to the same network as the computer sending the wake-up commands.
• Verify that the printer’s network settings are correct.
• Check the firewall settings on the computer and ensure that they are not blocking wake-up commands.

Printer Wakes Up but Goes to Sleep Again

• Adjust the power saving settings to prevent the printer from going to sleep too quickly.
• Check for any pending print jobs or scan requests that may be keeping the printer active.
• Ensure that the printer is not in a low-power mode.

Quick Answers to Your FAQs

Q: Why does my Xerox WorkCentre 6515 go to sleep?

A: The printer automatically goes to sleep to conserve energy. The power saving settings determine how long the printer stays active before going to sleep.

Q: How can I prevent my printer from going to sleep?

A: You can adjust the power saving settings in the printer’s web interface or CWIS to keep the printer active for longer periods of time.

Q: What is the best way to wake up my printer?

A: The most reliable method to wake up your printer is to send a wake-up command using the Command Line Interface (CLI).